Australian Projector Specialist
Affordable Bright, Stylish, and Easy to Use
The new 2,600 lumens Sony VPL-EX70 incorporates the newest 0.63 inch BrightEra inorganic 3-LCD panels by Sony. This unique system minimises degradation of colours over time, achieves higher brightness and sharper images in even well-lit rooms - and delivers exceptional reliability and longevity.
Perfect for classrooms, lecture rooms, corporate or home use, the VPL-EX70 has 2,600 lumens, 900:1 high contrast ratio, XGA resolution presents pin sharp presentations and colour-rich, video/film or gaming graphics. The stylish, practical design includes a built-in tilt angle of 8 degrees that automatically produces perfectly proportioned images; height adjustment and controls are simple to use and easy to get to.
HighlightsThis innovative inorganic panel technology was designed by Sony to deliver improved panel light resistance, higher brightness, higher resolution and increased panel reliability.
A built-in 8° tilt angle gives a perfectly proportioned presentation on the screen or wall.
The Sony VPL-EX70 height adjuster is located at the back to make it easier to see the effects of moving it upon your projected image and the control panel is located on the top of the projector.
The VPL-EX70 generates high quality images through the Interlace/ Progressive conversion processor, resulting in extremely accurate image reproduction.
Magnify a portion of the image displayed by 4x.
Freeze the image displayed and make changes to your presentation without the audience knowing.
Colour Light Output is a metric that measures a projector’s ability to deliver colour.
Achieve a pin sharp 80-inch image (diagonal) from just 2.3 metres away making it ideal for presenting in small meeting rooms and classrooms.
Password access, control panel lock and optional security cable and security bar can all help to prevent misuse, tampering and theft in classrooms or meeting rooms.
Comes with an extensive set of RS232 commands making it simple and easy to manage using any control system.
Lamp Cutoff: Lamp cuts off if no signal is input for 10 minutes and lights again when a signal is input or any key is pressed.
Standby: The projector goes into standby mode if no signal is input for 10 minutes and power consumption reduced to less than 3W.
