Australian Projector Specialist
The Sony SRX-T110 Projectors Offer Ultra-high 4K Resolution and 11K Lumens Brightness Responding to the ever-increasing demand for highly sophisticated visuals.
The projectors are equipped with three Silicon X-tal (crystal) Reflective Display (SXRD) devices and deliver an amazing resolution of 4096 x 2160 pixels (H x V) - more than four times the resolution of consumer HDTV (1920 x 1080).
This high-resolution capability allows 2K (2048 x 1080) images to be displayed simultaneously in four quadrants or in a twin “side by side” display. The projectors also offer a contrast ratio of 2500:1. In addition, while the SRX-T110 offers a brightness of 5,500 lumens.
The use of twin Xenon lamps, combined with multiple gamma curves of 2.2, 2.6, and user-defined values, means they offer pure, high-quality color tonal reproduction.
Furthermore, SRX-T110 offer very quiet operation, thanks to an intelligent cooling fan system.
Sony SXRD 4K projectors are the ultimate tool for projecting images in a range of applications such as command & control, simulation, computer visualization, planetarium and museum exhibition, and much more.
To increase the configuration flexibility, slots are available to accommodate four different optional boards that connect to various types of signal formats.
The SRX-T110 are pre-installed with an LKRI-005 HDCP DVI Board, which can accept DVI signals and provides a digital copy protection capability. In addition to the standard HDCP DVI input, three slots are available for the installation of optional boards. This allows simultaneous accommodation of up to four input/interface boards in the side panel of the projector. Users can select from single, dual, and quad screen modes, and assign the appropriate signal board to each quadrant.
The LKRI-001 Analog Input Board utilizes 5 BNC connectors that can accept 0.7 volt analog signal levels as RGBS, RGB sync on G, RGBHV, or YUV formats.
• The LKRI-002 HD-SDI (4:2:2) Input Board can accept both SMPTE 259M SD digital 525/625 line video and SMPTE 292M 1080 4:2:2 Y . Pb . Pr serial picture data. Switching is automatic by detection of the input signal frequency.
• The LKRI-003 Dual-link HD-SDI Input Board can accept any of the following signals: SMPTE 372M dual-link HD-SDI (4:4:4), SMPTE 292M HDSDI (4:2:2), dual-link DC-SDI (RGB 4:4:4), DC-SDI (YPbPr 4:2:2), or 12-bit (X’Y’Z’ 4:4:4) signals. With four LKRI-003 boards, the SRX-T110 and SRX-T105 can project 4096 x 2160 4K images.
• The LKRI-005 HDCP DVI Board can accept DVI signals up to 2048 x 1080P and offers a digital copy protection capability compliant with the HDCP specification to 1920 x 1080P and 1280 x 720P signals.
