Need to ask a question? Click here to email Projector Sales

Database

Epson projector australia

Secure Payments by Commonwealth Bank australia

Panasonic PT-RW630 Projector

Brochure

Manual

Gallery

Discontinued

Manufactured
2014 to 2016

Alternative Projectors

Enquire

Overview

Specifications

Connections

Projector Lamp

World’s First Laser Light Source 1-Chip DLP™ Projectors with 6,000 lm of Brightness

It is almost impossible to imagine that a laser light source would suddenly go blank.

The PT-RW630 uses two sets of light sources that group laser diodes into a number of modules. Based on redundant design, the laser diodes are put to considerable use, so over the long term, if a laser diode were to stop functioning, a protective circuit would activate to keep the brightness drop extremely small. Even if this were to happen during 24/7 operation, it would not result in downtime. The dual drive structure also keeps the optical engine output uniformly bright and colorful even if the light source's original brightness is different due to aging degradation.

Highlights

Detail Clarity Processor 3 gives natural clarity to even the finest details

System Daylight View 2 for enhanced color perception

DICOM Simulation mode*

Rec. 709 mode for HDTV projection

Waveform Monitor function

3D color management system

Full 10-bit image processing

Progressive cinema scan (3:2 pulldown)

Dynamic sharpness control

Digital noise reduction

IP conversion

AI scene control

2:2 pulldown mode

sRGB compatibility

Continuious maintenance free Operation

No need to replace a lamp or air filter, providing a dramatic reduction in the Total Cost of Ownership (TCO).

Long lasting Picture Quality

Excellent picture quality and brightness are maintained for a long time.

High Brightness

A new heat-resistant material is used in the phosphor wheel to withstand the high output of the laser light source. Combined with a drive system that is also optimized for the light source, this made it possible to achieve the world’s first 6,000 lm of brightness in a 1-chip DLP™ projector. Actually, the result of Panasonic efforts to optimize color reproduction enabled a perceived brightness that even exceeds the specification values, thus opening the door to a wide range of applications for the PTRW630.

A material with excellent heat resistance is used in the phosphor wheel. This achieves both high brightness and long-lasting reliability.

10,000:1 High Contrast

The PT RW630 projectors directly control the output of the laser light source itself, enabling faster response than lamp-based projectors. Frame-by-frame scene-linking modulation with complete digital control makes it possible to adjust the light output with higher precision. This gives the pt-rw630 its remarkable 10,000:1 contrast without lowering brightness.
This enables highly precise contrast control even when bright and dark scenes suddenly or frequently interchange. There is also almost no reduction in contrast when the projector is used for extended periods of time.

Highly precise contrast control when bright and dark scenes suddenly or frequently interchange.

Duel Drive Laser - long Life

The rate of brightness deterioration in the laser light source is extremely slow compared to lamp-based projectors.
Built-in brightness and color sensors eliminate fluctuations in brightness and color to constantly maintain the optimal balance. Together with a durable optical system, the PT-RW630 maintains excellent picture quality for a long period of time.
In many cases, this means no maintenance until the next refresh cycle.

Normal Mode Enables Approx. 20,000 Hours of Continuous Operation

In NORMAL mode with brightness of 6,000 lm, the PTRW630 Series projector requires no maintenance for approximately 20,000 hours. in ECO mode with brightness of 5,400 lm, the length would be approximately 24,000 hours. These modes are suitable for frequent but not continuous usage, such as education or signage applications.

Constant Brightness Modes for Long-Term Applications for up to 10 Years*

Installation conditions for surveillance applications such as control rooms and simulations do not require the high brightness of 6,500 lm. Lowering the output of the laser light source extends its life span.
With this feature in mind, the PT-RW630 projector has been equipped with operating modes that lengthen the usage time and maintain a constant brightness.
For instance, in LONG LIFE 3 mode, it boasts up to 87,600 hours of continuous operation, i.e., about 10 years of 24/7 projection, while maintaining fixed brightness and picture quality.

User Operating Mode

In addition to the preset operating modes, the PTRW630 projector can be customized to match your application—with greater brightness or a longer life. You can set the brightness to range from 650 to 6,500 lm, or set the lifetime for a maximum of
10 years, whichever you choose.

Powerful Liquid cooling system

The PT RW630 employs newly developed cooling systems for the laser light source and DLP™ chip to suppress temperature rises inside the projector, allowing stable operation up to an ambient temperature of 45°C (113°F).* The use of these cooling systems also achieves quiet operation of 35 dB, enabling viewers to concentrate on the projected content.

The liquid cooling system directly cools the laser light source modules.
It also enables the high brightness of 6,500 lm even in an ambient temperature of up to 45°C (113°F). The system is hermetically sealed, so you don't need to replenish the liquid.

Dust resistant with airtight optical block

The area between the laser light source to the DLP™ chip and prism is sealed to form an airtight structure for the optical block, the heart of the projector. This resists the effects of dust and other particles in the air, and enables use of the projector in a wide range of environments. This dust-resistant structure also maintains excellent picture quality and brightness for a long time and enables filter-free operation, all of which contribute to a lower TCO.

Specifications for the Panasonic PT-RW630

Image

Resolution: WXGA (1280 x 800)

Aspect: 16:10 native

Selectable: 4:3, 16:9

Brightness: 6000 (20000(½Life) hrs)

Eco: ( hrs)

Uniformity: 90%

Contrast: 10000:1 On/Off

Iris: Dynamic

Colours: 1.07 Billion

Refresh: 24-120 Hz

3D

Progressive: Yes

Shaping

Stackable

Keystone: Digital

Vertical: 40°

Horizontal

System

Lamp: No Replacement

Type: Laser

Panel: 0.65" DLP(1)

: Inorganic

Segments

Speed

Lens

Options: Yes

Focus: Power

Zoom: Power (1.38x)

Offset

Lens Shift: Power

Vertical: 60%

Horizontal: 10%

Screen Size

Throw: 1.82m to 31.65m

Ratio: 1.8000 to 2.5000:1

Physical

Weight: 23 kg

Dimensions: 49.8 x 20 x 58.8 cm

Operation

Positioning: Table, Ceiling, Front, Rear,

Rotation: 360°(up, down)

: 360°(left, right)

Cooling: Air, Liquid

Fan Noise: 35 dB

Eco: 29 dB

Air Filter: Filter Free

Filter Code

Security

Alarm

Anchor: Bar, Slot

Power

On/Off

Mains: 820

Eco

Standby: 0.4

Battery

Normal

Eco

Warranty

Projector: 5 year

Lamp: 90 Days, 500hrs

Production

Origin: Japan

Started: February 2014

Ended: October 2016

Connections for the Panasonic PT-RW630

Inputs

BNC: 5 BNC

Component: via adaptor

Composite

Digital: DVI-D, HDMI

Display Port

VideoLAN: HDBaseT

VGA: VGA

Disc Drive

S-Video

USB

Microphone

Mini Jack

RCA Audio

Outputs

BNC

Component

Composite

Digital

Display Port

VideoLAN

VGA

Trigger

S-Video

USB

Speakers

Mini Jack

RCA Audio

Network

Serial: RS232c

LAN: LAN (RJ45)

WiFi

Bluetooth

Remote
Control

Part No

option

Memory

Internal

SD Card

USB

Compatibility

DICOM: Simulation

Mac

PC: 1080p, 720p, 576p, 480p

Phone

Software: Crestron,
PJLink,
AMX

Media
Server

Image Files

Video Files

Audio Files

Office Files

Panasonic PT-RW630 Connections

Do You Need a Spare / Backup Projector lamp?

The replacement projector lamp for the Panasonic PT-RW630 is: No Replacement

No Replacement Lamp Specifications.

6000 Lumens, W ( W Eco), Laser Lamp, Life expectancy 20000(½Life) hours ( Eco)

Projector Sales: 1300 88 11 79

Sydney : Melbourne : Perth

Sydney : Melbourne : Perth

Database

Panasonic PT-RW630 Projector

Overview

Specifications

Connections

Projector Lamp

World’s First Laser Light Source 1-Chip DLP™ Projectors with 6,000 lm of Brightness

Panasonic PT-RW630 Connections

No Replacement Lamp Specifications.

Contact Us

Projectisle

Buyers Guide

Projector Sales: 1300 88 11 79

Sydney : Melbourne : Perth

Sydney : Melbourne : Perth

Browse Projector Brands

Find Projectors by Type

Projection Screen Brands

Database

Panasonic PT-RW630 Projector

Overview

Specifications

Connections

Projector Lamp

World’s First Laser Light Source 1-Chip DLP™ Projectors with 6,000 lm of Brightness

Panasonic PT-RW630 Connections

No Replacement Lamp Specifications.

Contact Us

Projectisle

Buyers Guide