High brightness · High picture performance
High brightness
Sony’s unique optical system with the new- generation LCD panel “BrightEra” incorporating a newly developed inorganic alignment allows a light output of 6000 lumen in VPL-FH300L and 7000 lumen in VPL-FW300L.
High resolution
VPL-FH300L: Three 2K × 1K panels with 2,210,000 pixels provide a resolution of 2048 × 1080 (horizontal/vertical).
VPL-FW300L: Three WXGA panels with 1,090,000 pixels provide a resolution of 1366 × 800 (horizontal/vertical).
High picture performance
DDE (Dynamic Detail Enhancer) technology enables conversion of interlace format video signals to progressive format, allowing you to obtain a detailed picture. The technology also reproduces film sources in 2-3 Pull-Down format with smooth picture movement. 12-bit 3D Digital Gamma Correction or 3D Digital Comb Filter for good picture uniformity is also provided.
Two-lamp system
Two lamps are equipped. You can select a desired mode to use two lamps at the same time or to use one lamp only. When you want a brighter light or want to use for a long time, select the appropriate mode.
Stylish round design
The stylish and functional round design recommends itself as befitting a stylish interior space.
Convenient and flexible setup
Power zoom/power focus and horizontal/vertical lens shift function
The projector is equipped with power zoom, power focus and horizontal/vertical lens shift function which allows you to change the size of the projected image with the Remote Commander operated away from the projector.
The lens is not supplied with this projector. No lens is supplied with this projector. You can select a lens suitable for the installation condition from among many option lenses.
* Only the manual focus adjusting function is provided for the optional lens VPLL-4008.
Center positioned lens
The projector is designed to locate the lens in the center of the projector. This enables easy setup, as the lens center aligns with the center of the screen.
Cable management
The control/connector panel section is covered so that the cables will not be visible.
Tilt installation (at front and rear)
You can install the projector by tilting it 90 degrees at the rear or 90 degrees in front. You can use a mirror for rear projection.
Direct Power On/Off function
The AC power for the entire system can be turned on and off by means of a breaker or other switch.
ID function
The function allows you to adjust or control each projector individually with one Remote Commander when you use two or more projectors (up to three) in one room.
Simple maintenance
Even when the projector is mounted on the ceiling you can change the lamp, the air filters or the lens easily because the replacement lamp is located at the rear of the projector and the air filters are located at the side.