Compatible with wide screen laptops for a true wide screen WXGA (16:10) presentation. The Sanyo PLC-WTC500L has a HDMI input terminal which is the most popular port for wide aspect ratio projector.
PLC-WTC500L incorporates industry’s first lamp selection system. Lamp selection system makes it possible for approximately 6,000 hours of projection. This eliminates the need to stock up on spare lamps far in advance, which makes it easy on limited budgets.
The Industry’s First Auto Lamp Selection System
The Alternating Mode allows a rotating pattern alternating the two lamps’ use time by selecting the lamp with the lower amount of use. This mode creates the balance between the lamps resulting in a combined lamp operation which is twice as long as conventional one-lamp models.
The Relay Mode uses one lamp up to the recommended lamp replacement time, then it automatically switches to the second lamp. If the first lamp’s life is fully used, the next lamp automatically takes over, allowing for uninterrupted presentations.
Another optional lamp extension method utilizes “lamp switch function” which you can set the timer to rotate each lamp every one to 24 hours, and Sanyo’s “PJ Net Organizer” can schedule the lamp rotation date and time. In order to use the projector for 24/7 continuous operation, the timer must be set to switch lamps every 24 hours. 24/7 continuous operation is useful for signage, advertising and information boards.
Easy Maintenance -Active Maintenance Filter
The Well-known AMF system detects air blockage or clogs, then scrolls the filter reel to the next clean filter. Ten (10) filters included in every cartridge, dramatically lowering maintenance.
Picture in Picture (P in P) and Picture by Picture (P by P) function
The Sanyo PLC-WTC500L is capable of projecting two images simultaneously by using eighter “P in P” and “P by P” functions. These functions are useful in video conference and educational systems.
Lens shifting and keystone correction permit advanced installation versatility
Vertical/Horizontal Lens Shifting (max. +50% vertically and ±15% horizontally). Vertical/Horizontal Keystone Correction (±40 degrees vertically and ±20 degrees horizontally) Keystone correction for vertical and horizontal lines means projector can be installed at an angle in relation to the screen. Projector can also be installed at 360-degree angles, while still being able to function properly
WTC500AL Optional Lenses
Lenses Throw Ratio Throw Distance
W11 0.8:1
W10 1.2 - 1.6:1
S11 1.6 - 2.1:1
T10 2.1 - 3.4:1
T11 3.4 - 5.4:1