Panasonic  PT-EW730 Projector

Daylight View Image Optimisation

Panasonic‘s Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to the surrounding illumination.

Colour Adjustment Function

A colour adjustment function allows you to easily correct for slight variations in the color reproduction range of individual units set up for multiple projection, particularly in side-by-side configuration. Correction is performed on 3 colours (R, G, B) or 7 colours (R, G, B, C, M, Y, W).

Inorganic LCD Materials Maintain High Brightness and Image Quality Longer

The optical block of the PT-Ew730 projectors maintains a high level of performance over time, due to the use of inorganic materials in the LCD panels and polarizers, thus achieving a replacement cycle of 10,000 hours with high brightness and excellent picture quality.It also makes them the logical choice for a truly dependable LCD projector system.

Mechanical Lens Shutter

The mechanical lens shutter completely blocks annoying light leakage when the projector is on standby or temporarily not in use, such as during a meeting.

DICOM Simulation

This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity

Flexible Installation

Digital LInk - The Single Cable Solution

Equipped with a DIGITAL LINK terminal, the PT-EW730z allow transmission of HDMI, uncompressed HD digital video, audio and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent

Flexable Lens Shift

The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility during installation. It lets you easily make adjustments with the remote control. The unit can also be rotated 360 degrees vertically. This means you can install it at any angle you want, to accommodate different installation conditions

Optional Lenses

Choose from a wide lineup of optional lenses for your system, including short-throw, long-throw zoom and fixed- throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease

Easy Monitoring and Control over LAN

Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status.

In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.

The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.

Crestron Connected and AMX Device Discovery

The LAN terminal allows a computer connected to the network to use Crestron Connected™ application software to manage and control system devices. Besides, the AMX Device Discovery technology is built in the PT-EW730. Mechanical Lens Shutter The mechanical lens shutter completely blocks annoying light leakage when the projector is on standby or temporarily not in use, such as during a meeting.

Corner Keystone Correction Enables Angled Projection

All you need to do is designate four points as the corners of the projected image, and this function easily carries out horizontal and vertical keystone correction. Lens-Centered Design A lens-centered, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning the installation site.

Side by Side and P-in-P Function

Two different image sources can be simultaneously displayed onto a single screen. You can also switch to P-in-P (Picture-in-Picture) mode and display a sub-window onto the main screen. The sub-window can be positioned anywhere on the screen for more flexible and effective image presentations

Abundant Terminals, Including HDMI, DVI-D Input, and DisplayPort

Extensive interfaces include HDMI and DVI-D input terminals, DisplayPort, DIGITAL LINK and two sets of computer (RGB) input terminals.The serial terminal (RS-232C) has an Emulate function that lets you continue using existing control systems when replacing previous Panasonic models. It is also possible to output audio during Standby mode. This is convenient when connecting an external audio system through the projector.

System flexibility

• DIGITAL LINK (based on HDBaseT™ technology) and DisplayPort single-cable connections
• Powered lens shift, zoom, and focus via remote control.
• Wide range of optional lenses are interchangeable with PT-EW730
• Horizontal/vertical and corner keystone correction
• Emulation function compatible with existing control systems when replacing legacy Panasonic and Sanyo projectors
• Compatible with PJLink™, AMX, Extron, and Crestron Connected™ control systems
• Mechanical lens shutter prevents distracting light leakage when on Standby
• Direct Power Off function enables safe projector shutdown via breaker switch
• Anti-theft features include a customizable startup logo, password protection, and security bar