The Projector Specialist

National Sales Line

1300 88 11 79

Adelaide

Brisbane

Melbourne

 

(08) 64677744

(07) 33332744

(03) 90956744

Perth

Sydney

 

(08) 64677744

(02) 80042744

ProjectorsScreensLampsAccessories
    GoTo UK Projector Site

The Australian Projector Specialist

 

Home |  Contact |  FAQ |  Projector Guide | Add Projectisle to your projector links Short List View Cart

 

SXRD Projection Panels by Sony

_____________________________________________________________________

track

SXRD - Silicon X-tal*1 Reflective Display

 

Sony's LCOS panel - SXRD, a liquid crystal display device for use in projectors, which achieves a panel contrast of over 30000:1 with high resolution of Full HDTV(1920Hx1080V)jusing a silicon backplane. Its main features are:

 

High Resolution Picture Quality


The outstanding picture quality generated by SXRD is due to the large number of pixels contained within the image area of the device. For this to be achieved both the size of each individual pixel and the space between pixels has been minimized. The combination of radically designed Silicon Driving Circuit technology and novel Silicon Wafer Process Technology, coupled with new Liquid Crystal Device technology, has enabled 2,000,000 pixels with a pitch of 9um to be arranged just 0.35um apart (Diagram1-a). This is the world's smallest inter-pixel spacing*2 thus delivering full HDTV (1920Hx1080V, 16:9 widescreen format) within an image area measuring a mere 0.78 inches diagonally across.



In comparison to high temperature Poly-Silicon liquid crystal devices, this represents a 2.4- fold increase in pixel density, and a 10-fold improvement in inter-pixel spacing.

 

These advances have facilitated the achievement of a high-grade, high-resolution picture quality previously unseen on fixed-pixel projection devices, with outstanding cinematic quality and image smoothness that can be enjoyed free from the grainy "mesh" effect noticeable on conventional projectors.

 

 

High Contrast and Rapid Response Time


In Sony's SXRD device the liquid crystal cell gap measures less than 2um, far thinner than conventional high temperature Poly-Silicon liquid crystal or LCOS(Liquid Crystal On Silicon)devices (Diagram1-b). Furthermore, in place of the TN(Twisted Nematic)liquid crystal commonly used in projection devices, Sony's unique "Vertically Aligned Liquid Crystal" materials, whereby the liquid crystal molecules are aligned vertically to the cell substrates have been used. The materials have been developed to provide good driving voltages and high quality optical properties, even in such thin cells, ensuring high contrast images that would otherwise be unachievable with conventional TN devices (Diagram1-b).

These innovations have made a high panel contrast level of 3000:1, and very rapid 5 milli-second response time a reality. This represents an approximately threefold increase over conventional projector contrast levels.

 

Reliability

 

Sony has overcome the long-standing challenge of incorporating an inorganic alignment layer to the liquid crystal cell, enabling the alignment technology of vertically aligned liquid crystals which has been problematic until now. This inorganic material has successfully replaced the organic polyimide film previously used to align the liquid crystal. This innovation has greatly improved alignment layer durability, ensuring the longevity of the high-resolution, high-grade features of the SXRD device
 

 

Combined High Product Quality and Production Efficiency

 

With conventional projection devices, in order to ensure uniform cell gap, the substrates must be assembled one at a time in a piecemeal fashion. At the same time, spacers such as beads or posts known as "columns" would also need to be inserted within the display area of the liquid crystal cell. However, in the case of the SXRD device, through the development of Planarization Technology of Silicon Backplane, and alignment layer fabrication process, Sony has established a means of assembling entire wafers, even without the use of spacers. Thus many panels are created at once in unison. This process has significantly reduced dust ingress, while simultaneously improving both picture quality and production efficiency

 

 

The features and capabilities of the"SXRD"technology make it ideal for use in front projectors and rear projection TVs of home theater dimensions, capable of delivering the high resolution, high-grade content that is becoming increasingly prevalent. The move towards content of this nature is set to continue with the forthcoming launch of terrestrial digital broadcasting in the near future. Sony aims to introduce front projectors and rear projection products incorporating this technology to the market within the next fiscal year.

Projectisle.com.au – “The Brands you know, Priced to go

 

______________________________________________________________

HomeAbout UsContactLinksPayment OptionsPrivacy PolicyProjector Guide

Site MapTerms & Conditions of SaleWarranty
 

 

Projector and projector Lamp prices are in Australian dollars and include GST, unless otherwise stated.
Prices and product availability can fluctuate and are subject to change without notice.

 

Copyright © projectisle.com.au 2014
All third party trademarks are hereby acknowledged

 

projectisle.com.au Is Proudly Australian Australian Flag : ABN: 53 135 231 917